- Easy to register across Australia, with Second Stage Manufacturer Federal approval
MAZDA BT50+310 WHEELBASE EXTENSION
Designed for stability, increased capcity and even load distribution.
Drive with confidence: Adaptive Manufacturing wheelbase extended vehicles are:
- Proudly built in Australia
- Available on Mazda BT-50 dual cab, freestyle cab and single cab variants
- Available throughout Australia with our comprehensive turn key packages
- Rigorously safety tested to ensure durability against flex and torsion
- Designed & certified in Europe to comply with strict safety regulations
Benefits
The Adaptive Mazda BT50+310 wheelbase extension provides a wide range of benefits that cover increased capacity, stability, and load distribution.
- Increased tray capacity – 2187mm long tray (Dual Cab)*
2440mm long tray (Space Cab)*
2883mm long tray (Single Cab)* - Balanced Load Distribution: Prevents overload on front and rear axles.
- Enhanced Towing Performance: Optimized weight distribution improves towing capabilities.
- Improved Stability: Enhanced vehicle handling and control for better stability.
- Increased Payload Capacity: Adaptable GVM upgrade options provide greater payload flexibility.
Premium Quality and Safety
Supported by a 5-year/150,000 km warranty, our wheelbase extension solutions are expertly engineered by our European partners at VETH Automotive in the Netherlands. They undergo extensive safety testing to ensure they meet rigorous standards for flex and torsion.
-
-
- 5-year/150,000 km Adaptive Manufacturing warranty
- Federal Government Second Stage Manufacturer approved wheelbase extension
- ISO9001:2015 Quality Certified company
- Easy registration and transferability in any state or territory without additional engineering certification
- Designed and engineered in Europe
- Manufactured in Australia
-
Customised adaptations and uses
Extending the wheelbase allows users to customise their vehicle to meet their specific needs. Our all-inclusive solutions are available across Australia.
-
-
- Specialty Vehicles
- Emergency Services
- Mining and Fleet Operations
- Government vehicles
- Slide-On Campers
- Building and Trade Solutions
- Agricultural Equipment and Farming
- Commercial Haulage
- Customised Equipment Installation
-
Model
SPECIFICATIONS
Upsize to a 2178mm long tray – it's a Freestyle Cab tray on a Dual Cab!
*Approximate tray sizes shown. Actual builds may vary.
Upsize to a 2440mm long tray – it's a Single Cab tray on a Freestyle Cab!
Upsize to a 2883mm long tray, the longest of our options for the ultimate in transporting longer loads.
Tip Top Equipment
TRAY
Bronco
TRAY
ACCESSORIES &
UPGRADES
See the range of accessories and upgrades available for the Mazda BT-50+310 wheelbase extensions.
The Mazda BT-50+310 is a popular commercial vehicle suitable for towing, load-carrying, off-road driving and more with the right modifications! From family transport to weekend tow vehicle, off-road camp rig and load-carrying work vehicle, the Mazda BT-50+310 is a multi-purpose vehicle that excels in many areas.
Pedders has the suspension, brakes and towing upgrade parts available to completely transform your Mazda BT-50+310 with a GVM upgrade available to 3360kgs*, backed by a Pedders 2 Year/40,000kms Nationwide Warranty.
GVM Upgrade: *Higher grade options are available, however these exceed recommended axle load and may exclude manufactures warranty
Built in Australia, the new TAG Extreme Recovery (XR) Towbar has been engineered for professional trade and fleet applications as well as adventurous offroaders alike, needing to get themselves and their convoy out of the most challenging recovery situations.
-
-
- 89mm x 89mm Extreme Duty Reinforced Crossbar
- Two WLL 4500kg Load-Rated Recovery Points integrated into our 3-Piece Design side-arms with bevelled edges to suit soft-shackles
- Flush chassis-mounted profile for maximum offroad clearance for improved departure angles
- Highly durable, textured Extreme Duty Powder Coated Finish
- Dual top-mounted Trailer & Anderson Plug Mounts
- Class 4 Towbar – 50mm Square Hitch Receiver
- TAG Limited Lifetime Warranty
- Includes Zinc Tow Ball & Extreme Duty Drop Hitch rated at 3500kg towing capacity / 350kg ball weight, Pin & Clip and D-Shackles
-
Utilising Safari‘s traditional design concepts and incorporating the very latest in scanning and CAD design software, Safari‘s V-Spec Snorkel for the Mazda BT-50 is ready to perform in the most extreme environments, protecting the vehicle’s engine against water, dust, and snow ingress while delivering cool, clean air to the engine.
Fully designed and manufactured in Australia, tested and verified on a custom flow bench to ensure the airflow meets or exceeds the factory inlet design. The Safari Snorkel offers the best air intake protection and performance for today’s 4WD vehicles.
Frontier long range tank is setting the benchmark for long range fuel tanks around the world. Manufactured from a resilient cross-linked polymer, each Frontier tank offers incredible strength and rigidity, while providing a significant weight reduction over steel long range tanks.
The UV stable plastic material ensures these tanks will survive in the most hostile environments. With a wall thickness of 7-9mm, every Frontier long range tank is individually pressure tested and backed by an industryleading three-year manufactures warranty.
OAD 5D TPE Floor Mats fit the Mazda BT-50. Tailored Door Sill Covered Floor Mat Liner Car Mats. High-quality TPE (eco friendly) material, waterproof, custom moulded, advanced Surfacing Design, Non-slip front or back.
-
-
- With scuff plates and under seat covered, offer a comprehensive perfect fit, keep the interior carpet clean, protect its resale value
- The raised lip captures all spills, water and debris keeping your interior original and clean
- Advanced surfacing creates channels that carry fluids and debris to a lower reservoir with further channeling to help minimise fluid
- The special surfaced backing will hold firmly to the floor, prevent the mats from slipping, improved safety
- Incredibly durable and suitable for all weather, against snow, mud, sand, water and more
-
WHY CHOOSE
AN ADAPTIVE MANUFACTURING WHEELBASE EXTENSION?
A Big thanks to Hayley and all the team at Adaptive Manufacturing.
You were always responsive and reassuring as we went through a process that we were doing remotely and were very unfamiliar. Keep up the good work. Twelve out of ten!
Paddy & Karen, Canberra
“I don’t know what else to say besides being over the moon with my decision to extend and upgrade my ISUZU KING CAB UTE by Adaptive manufacturing .
If anyone inquiries about it I will recommend you 100% . “
Wally & Barbara, QLD
3 years ago I was lucky to become the owner of an Amrok extended wheel base done by this wonderful crew.I have been that happy with their work I got them to fit me up with the new Ford ranger just a last month with suspension upgrade and extended chassis.
Harold & Sue C, NSW
Love the vehicle and very practical, loved dealing with Hayley and happy everyone took care of my vehicle. I felt it was in safe hands the entire time!
Des M, SA
Going perfectly well so far, not noticing the turning circle at all.
All did a fantastic Job and very professional and friendly. I am looking forward to now finishing off the Canopy and will hit the road in May, would love to stop by to say hello to the team.
Peter C, VIC
Our experience with Adaptive Manufacturing for our Isuzu extension was very satisfying, all our questions and concerns were answered and attended to promptly without any fuss.
After explaining the required outcome for the vehicle (Carry a slide on camper) Hayley and Peter consulted with us to achieve the required result, our Intrepid Camper is not ready as yet, but we have had a sample on the Ute for a try out and i looks like the combination will be perfect.
Martin F, VIC
We had a great experience with Adaptive. Total transparency and continued communication throughout the process. The after sales support is fantastic also.
Would definitely purchase my next ute through Peter, Hayley and the team.
Jordan H, NSW
I can still carry what I need for work and don’t have to worry about where to park the trailer.
Tim G, Electrician, QLD
At last I can put some weight in front and on top of the rear axle, not entirely behind it. This is where the weight should be.
Stuart D, VIC
Having a decent tray large enough for a pallet of Gyproc and can still access my tow bar as before.
Chris D. Custom Home Builder SA.
Use it on the farm, drive long distances, carry more gear and take the kids for a swim in the waterhole
Chris and Mel, SA
I can tow my fifth wheeler and still carry my family, the perfect retirement vehicle.
David S. NSW